Best Plumber in Edmonton Gives Homeowners a Guide to Resolving Hard Water

It might sound like an oxymoron at first, but hard water does exist. In fact, hard water is one of the biggest household concerns in the U.S., as many of its states suffer from elevated water hardness values, putting the health of its citizens at risk. While Canada is much more fortunate, enjoying extensive fresh water supplies, the water quality is still a growing concern following a number of incidents involving municipal drinking water.

What Is Water Hardness?

All freshwater consists of trace amounts of naturally occurring minerals. However, hard water has an excessive amount of these minerals, particularly calcium, magnesium, and manganese. There are many factors that can affect water hardness. The water source can be contaminated with rain, dust, volcanic gases, and other naturally occurring gases, such as carbon dioxide. Or, it can be tainted by toxic pollutants, such as fertilizers and pesticides.

Read more on this article: http://bit.ly/2qhyMqb

Edmonton Furnace Professionals Discuss Perks of Smart Thermostats

Thermostats have come a long way since the round dial models first seen in many older homes. Thermostat technology have become so advanced that there’s so many options to choose from, including line voltage thermostats, low voltage thermostats, programmable thermostats, and even Wi-Fi smart thermostats. Although your old thermostat may work fine, there are many reasons why you may want to replace it with a more modern and advanced model. Your Edmonton furnace professional explains.

The case for smart thermostats

Users of programmable thermostats were able to save considerably when the technology was first introduced, but now, with the introduction of smart thermostats, homeowners have the chance to make a much larger leap in energy efficiency, and consequently, bill savings. How does this happen, you may ask? That’s because smart models can actually learn your schedule, preferences, and habits. Some can even tell when you’re home. Read more from this blog. http://bit.ly/2nF1W4P

Edmonton Furnace Repair: Troubleshooting 3 Different Furnace Types

Turning on the furnace in your Edmonton home can be one of the most satisfying things you can do on a cold day—unless your furnace is broken. If the air never warms up, that’s a sign that there’s something seriously wrong with your home heating system. And since this particular home appliance plays a direct effect on your overall comfort, it pays to know what you can do to restore your heat.

Your Edmonton furnace service offers you these tips.

Start with the thermostat

If you have a modern thermostat, then you need to get to know its multiple settings. Confirm that the system is set to ‘heat’ and verify the actual temperature. After resetting it, wait a few minutes for the system to adjust to the new settings. If the heater still blows cold air, the thermostat may need to be recalibrated or replaced.

Troubleshooting a gas furnace

If your gas furnace doesn’t turn on, check the circuit breaker. If the breaker is tripped, the electronic starter will not have power, and consequently, won’t be able to ignite the burner, and a cold air-blowing heater is what you get. Read more from this blog. http://bit.ly/2mShFt6

Edmonton Plumbing Info: Water Pressure Problems and How to Tackle Them

Water is a precious commodity that many households take for granted. Whenever you open a spigot in your home, you expect water to flow out at certain speed—and oftentimes, it does as expected. However, when water starts to trickle or surge, that’s an indication that something’s not right with the pressure, and something needs to be done.

If the pressure is too strong, it could cause leaks. Too weak and you might not have enough to rinse soap away when you bath. Your Edmonton plumbing experts share with you some info to help you understand water pressure and what you can to tackle problems associated with it.

Why does water pressure vary?

Pressure can vary at different times of the day and depending on your location, you may find that you have lower or poor pressure during mornings and early evenings when demand for water in the community is high. That said, there are other causes of fluctuating water pressure depending on the plumbing system that you have. For instance, if you have a whole house water filter, a clog in the filter can result in low water pressure. Likewise, if you have a pressure tank, a leak in the tank assembly could mean no water at all. Read more from this blog. http://bit.ly/2nAT4gO