Monday, January 23, 2017

Maximise Efficiency: Understanding Electronic Furnace Ignition Systems


The need for high efficiency in heating systems has led to various discoveries that have changed how consumers meet their HVAC demands, whether domestic or commercial. Electronic ignitions are some of the inventions that have increased the potential of furnaces. Traditionally, a furnace came with a standing pilot that only works for low-efficiency systems. One advantage that the electronic ignition offers over a conventional pilot light is that the latter requires a gas flame to keep burning, meaning that a furnace consumes excess energy. When getting a replacement, an Edmonton furnace service can provide options for the best electronic ignition to suit your requirements.

Intermittent Pilot

Modern furnaces can feature intermittent pilot or hot surface ignition. With the former type, a gas line is designed to allow gas flow when the thermostat calls for heat. There is a high voltage electrical spark that ignites to form a flame, which powers the pilot light. A furnace contains a flame sensor that tracks pilot light to see if it is functioning properly, and if it is, the main gas valve is allowed to open, causing the burners to light up. When replacing your appliance with an intermittent pilot system, a few potential challenges may arise during its lifetime. For one, the pilot gas pipe may not be correctly positioned, which is why you should consider professional furnace replacement. Another problem is that the connection to the thermostat may be faulty or loose. A dirty nozzle or defective electronic spark may also cause a lot of trouble. Read more on this article: http://bit.ly/2jOeYr4

Sunday, January 22, 2017

Professional Heating Tips: Suitable Furnace Installation Location


A furnace installation comes with several considerations, and one of them is location since the spot you place the device will affect its efficiency and other aspects. The home has various options when it comes to choosing a furnace location, so it’s understandable that you may get overwhelmed; but if you know what makes one site more suitable than another, then you can maximise on the installation. An Edmonton furnace service can help when making this choice. Your furnace can be kept in a confined space such as a cabinet or attic, or an unconfined area like the garage.

Type of Furnace

The suitability of a furnace installation site will vary depending on the type of furnace you pick. A gas furnace, for example, requires sufficient air for circulation, meaning that you have to consider the oxygen supply of the location first. Unconfined spaces have no problem providing fresh air, but for confined spaces, you may have to add openings to make sure that a gas furnace does not lack the air needed for complete combustion. Consider any other appliances in the vicinity that will compete for air supply. Read more on this article: http://bit.ly/2jOt9fI

Saturday, January 21, 2017

Edmonton Plumbing Experts Ensure Optimum Heating System Performance


At this time of year, colder temperatures mean that homeowners and businesses alike depend on reliable heating. For domestic properties or workplaces with central heating systems, regular maintenance including an annual service helps to prepare for the coming winter cold.

Problems in your central heating system

If your property is fitted with a central heating boiler and pipework to the radiators, you will almost certainly be well aware of the importance of regular maintenance to keep the system in working order. Nonetheless, despite annual services, central heating systems can still accumulate debris or unseen sludge over time. Some of the common symptoms include a noisy boiler, cool or cold radiators, and increased energy bills due to the system becoming less efficient. Read more on this article: http://bit.ly/2jOogTX

Friday, January 20, 2017

Edmonton Heating Tips: Turnkey Solutions When Checking for Drafts



Even if an owner utilises the services of the most professional Edmonton heating company, the fact of the matter is that drafts still cause a great deal of consternation when the temperatures outside drop below freezing. What are some lesser-known ways to check if air may be escaping from a window or door?

The Candle Method

This is actually one of the most traditional techniques and yet, it has been all but forgotten in these modern times. Carefully hold a lit candle up to a window or door frame. Watch to see if the flame flickers. If a great deal of movement is observed, this is a sure-fire sign that a leak is present. Read more on this article: http://bit.ly/2jn7DlN

Thursday, January 19, 2017

How to Tell If Your Leaking Water Heater Needs Repair or Replacement



A water heater, whether electric or gas, is expected to last up to 10 to 12 years when properly maintained. Within this period, however, there are chances that it could have a leak. A first-time leak may appear as a minor problem but could later develop into a major nuisance. Even the slightest amount of water has the potential to cause damage to your walls and floors. Depending on where the leak occurs, a professional Edmonton plumber can fix the problem before the system gets completely damaged.

Dripping Pipes

Usually, water heaters connect to hot and cold water supply lines. These two pipes come with joints to allow them to bend toward the water heater. The cold or the hot water line could leak around the joints, making it hard to identify where the seep out is emanating from. A plumber can identify the problem and fix it. Read more on this article: http://bit.ly/2jOqm6A

Wednesday, January 18, 2017

Why Invest in Proper Air Conditioning Ductwork for Your Edmonton Home



Your HVAC device is the breathing system of your home, and for that reason, you must ensure that it is functioning properly to avoid choking it. When you have an air conditioning unit installed, its duct network is one of the areas that must be operating optimally if the air circulation in your home is to go smoothly. Most homeowners will just concentrate on buying gadgets to augment any AC problems and not find out if the ducts at home are working efficiently. These miscalculations can lead to inflated power bills due to the inadequacy of the systems. Unless your system is a ductless one, then you should dedicate enough resources to getting the installation right, and an air conditioning professional can highlight the faults present and offer the necessary solutions.

Why You Need Them

The cooling cycle needs to process air from two sources for proper conditioning. A building must provide the supply and return air, meaning corresponding ducts for each source, while some homes also require exhaust tubes, particularly the multi-storied ones. The supply ducts let air come in from the outside through the ventilation while the return air goes through the filter and into the plenum where it mixes with the incoming flow. Maintaining these two separate duct systems allows the circulation of air in your home to be completed, meaning no accumulation of contaminants that pose health risks. An Edmonton air conditioning company can ensure that the appropriate return and supply pipes are working right before you become frustrated over problems brought about by your AC not meeting its cooling loads. Read more on this article: http://bit.ly/2jOjw0z

Tuesday, January 17, 2017

Get Help from Drain Cleaners for Slow Draining and Running Toilets


Slow draining or running toilets in your home can be disastrous because they use up a lot of water, causing inflated bills. You may notice a problem with the toilet from the constant dripping of water after flushing, which can be frustrating especially when it goes on all day. One way to detect a draining problem is to pour a bucket full of water and see how it acts. If the draining process takes longer than usual, makes gurgling sounds, or leaves material behind, then there is something wrong. When dealing with such a significant draining problem, you have to get drain cleaners for a thorough servicing. An Edmonton homeowner should learn the potential causes of such behaviour to get help in good time.

Venting Problem

A toilet that won’t drain or takes too long may be due to blockage in the vents that lead to the main sewer line. If debris is stuck in some parts of the vent, waste removal becomes a problem for the whole system. A clogged vent can also lead to low toilet water levels. Vents allow air down the system, which pushes the water through the drain pipes, so when they don’t work right, it causes a vacuum to form when water is passing through the pipes, and this pulls the liquid from the toilet bowl. If the installation of the vents is not up to standard, this too will interfere with the flow of waste from the toilet. Cracks in the venting can be another reason for your toilet to experience this problem. Edmonton plumbing companies offer vent cleaning and installation services that are effective in such instances. Read more on this article: http://bit.ly/2jn30Iz

Monday, January 16, 2017

Why You Should Have a Plumber Install Regular Shower head Replacements



A majority of homeowners don’t even remember the last time they had a new shower head installed–and that is alarming. For most people, as long as the water is flowing from the shower, there is no need to fret over it, but you may be using a fixture that has been in your home since its construction. The water in the system undergoes treatment with different chemicals to make it safe, and that means all those residues stick to the pipes and other surfaces. After prolonged use, these shower heads start experiencing problems, thus the need to replace them accordingly, which is a job a plumber can carry out. Edmonton homeowners should know the reasons for replacing shower heads and how often to do it.

Getting Rid of Bacteria

Showers are connected to the rest of the plumbing, so any microorganisms that enter the system may find their way to the shower head. Some installations come with filters to prevent bacteria and dirt from ending up in the water you use, but a shower that has gone too long without a replacement will build up bacteria, which poses certain health risks. Plumbers can provide replacements of the head and filter as well. Read more on this article: http://bit.ly/2jOq8fu

Wednesday, January 11, 2017

Common Indicators That There’s an Urgent Call for Furnace Replacement


The furnace is an essential part of any home in Edmonton, especially during those chilly winter nights. As such, it is essential to ensure that your furnace is functioning properly and is well-maintained. When repairs are needed, it should be fixed right away, and if a furnace replacement is necessary, then it should be done immediately.

So how do you tell when your furnace needs replacing? You will find a list of some of the key indicators that your furnace may be in need of replacing. Being alert to these factors is vital – after all, the last thing that you want is for your furnace to break down in the middle of a cold snap when you could have easily had it replaced a couple of months prior. Read more on this article:


http://bit.ly/2j2s2ZC

Tuesday, January 10, 2017

Furnace Installation in Edmonton: Different Types of Furnace Fuel


If you are seeking to install a furnace using an Edmonton furnace service, you may well already know that there are several different types of furnace fuel. Below, you will find a guide to the different furnace fuel options that are out there and their various pros and cons.

Understanding these things can help you make an informed decision before using expert furnace installation services.

Natural Gas Furnaces

These types of furnace heat up very quickly – indeed, almost instantaneously – and they use looped pipes filled with water to heat up your home via radiators. Natural gas is a relatively inexpensive fuel, though it is a fossil fuel associated with a higher carbon footprint for your home. The three primary types of gas furnaces from which you can choose are single-stage furnace, two-stage furnace, and modulating furnace. Read more on this article:


http://bit.ly/2j2uHlU

Monday, January 9, 2017

Technological Advances in Plumbing Systems for Houses in Edmonton


In recent years, plumbing has started to become automated. Sensors and warning lights enable us to keep track of the health of our plumbing system at all times of the day. These features are very useful, however, it is always worthwhile remembering that no matter how advanced your plumbing system is, you will always need to have the number of an Edmonton plumbing company on hand. This is to ensure that any plumbing problems are dealt with as quickly as possible by a professional. Below, you can find out about two key types of technical innovation that have helped in revolutionizing the world of plumbing.

Chemical Dosing Pumps

Some homeowners like to add substances to their water, such as chemicals that will remove limescale from their pipes or drain blocking substances that will stop the plumbing system from getting clogged up and causing flooding. Usually, this is done by hand, but chemical dosage pumps can do this automatically. Read more on this article:


http://bit.ly/2iG7v0F

Sunday, January 8, 2017

Insulate Your Home to Make the Most of Your Heating System in Edmonton


Having a quality, energy-efficient boiler, furnace, or any other type of heating system is highly desirable in any home. Unless your home is also well-insulated, however, you will find that heat escapes fast through the ceilings, floors, and walls – not to mention poorly glazed windows. So, if you want to make the most of your heating in Edmonton or Stony Plain, make sure to follow the handy home insulation guide below.

Windows: Sealants and Double Glazing

Seal up any gaps in window frames and invest in double glazing. What you spend on getting double glazing fitted will be saved many times over on your heating bills. This is due to the double glazing stopping heat from escaping through cracks between window panes and window frames. Read more on this article:


http://bit.ly/2iFUzHO

Saturday, January 7, 2017

Expert Water Safety and Water Heater Advices for Movers in Edmonton


Moving to a new home can be so much fun, but there are also some practical things to sort out, such as knowing who your local plumber is. Below, you will find two hot tips for making the most of your new Edmonton house or apartment.

Water Safety: Run the Taps

Now usually, water experts would advise not running taps needlessly for long periods of time. This is because leaving taps running is a waste of water and bad both for the planet and for your wallet when it comes to paying the water bills. When you first move into a new property, however, it may well have been vacant for some time. Read more on this article:


http://bit.ly/2iG7sSx

Friday, January 6, 2017

How Air Conditioning Systems Work and Why Homes in Edmonton Need Them


Exploring air conditioning options is a fantastic idea, especially if you live in Edmonton. You need the guidance of a plumbing and HVAC expert, such as Capital Plumbing & Heating, to fully understand how air conditioning systems work and what benefits they can offer your home.

How Do Air Conditioning Systems Work?

Air conditioning systems work to cool down the air in your home. They do so by taking in hot air, and using special chemicals to trap that heat and then release it outside before pumping the newly cooled air back into your home. Air conditioners are usually composed of three sections. The first part is a compressor, the second is a condenser, and the third is an evaporator. Read more on this article:


http://bit.ly/2iG7oC7

Thursday, January 5, 2017

The Bad Effects of Water Damage and When to Call Plumbing Companies


Problems with plumbing all too often lead to burst or leaking pipes or overflowing drains. In cases like these, it is crucial to get in touch with one of the top plumbing companies in Edmonton to get the problem fixed as soon as possible. This article explains some of the unfortunate consequences that water damage can have in your home.

Stains

Unsightly stains on carpets, ceilings, and plaster work are some of the first signs of water damage. Not only can mold grow and spread over time, these stains may also be hiding damage deeper in the fabric of your home. Read more on this article:


http://bit.ly/2iFYDIk

Tuesday, January 3, 2017

Expert Tips On Avoiding Plumbing Blockages From Certified Plumbers


Blockages in water pipes and other sections of a domestic plumbing system are some of the key reasons why people call out Edmonton plumbers. These blockages can be very destructive and can result in burst pipes, flooding, and damage to beams and furnishings in the home. In order to help you to avoid these issues, read on to find some handy ideas on how to keep your home’s plumbing system healthy.

Think Before You Pour

First of all, be careful about what you pour down the sink. Oil poured down the faucet is one of the key causes of blockages in home plumbing systems. Cooking oils may look like liquids when you pour them away as they are still hot, but they will congeal once they get cold and cause major problems. In addition, once these oils reach the municipal plumbing systems, they can cause problems for other homeowners too. Read more on this article:


http://bit.ly/2iG7pGl