Understanding an Energy-Efficient Furnace and Condensing Technology

In Canada and the United States, governments have adopted a proprietary rating system known as Energy Star. It is therefore always wise to choose a furnace which displays an Energy Start sticker as well as an independent rating.

There are two benefits with Energy Star furnaces. First, these models are considered to be the most efficient on the market. Secondly, this efficiency has been achieved without sacrificing power and heating capabilities.

Choosing a Furnace in Edmonton that Employs Condensing Technology

While the science behind condensing systems can be quite complex, the fact of the matter is that this revolutionary approach to heating has made a dramatic difference in terms of heating efficiency. The basic principle behind condensing technology is the ability of a furnace to extract additional water vapour from within combustible gases.
http://capitalplumbing.ca/understanding-an-energy-efficient-furnace-and-condensing-technology/

Need Furnace Repair? Learn the Causes of Short Cycling in a Furnace

Furnaces are handy appliances to have in the house, but they can be troublesome when they start malfunctioning. With the different parts that make up the heating system, there is so much that could go wrong without you knowing what the cause is.

Attempting to fix some problems with a malfunctioning furnace can be difficult when you can’t make a diagnosis, thus, the need to get professional services. Short cycling issues are some that you can expect to encounter with a furnace. Knowing what may be causing the problem makes it easier to solve it with the help of furnace repair experts.

What is Short Cycling?

Short cycling refers to the state of a burner shutting on and off before a furnace can meet the call for heat that is controlled by the thermostat. Normally, when you turn on a furnace, the burner should come on followed by the blower, and keep running until the call for heat is met.
http://capitalplumbing.ca/need-furnace-repair-learn-the-causes-of-short-cycling-in-a-furnace/

Plumbing Experts List Down Reasons behind Low Water Pressure in Taps

You can experience frustrating moments when you open a tap in your home and instead of getting a steady gush of water, it just trickles. It would take a long time to finish the simplest tasks in your home when taps and shower heads are not supplying water as they should. This problem is a result of low water pressure that may be due to many reasons.

Before you call in a plumbing expert in Edmonton, first assess how far the damage stretches. Is the pressure problem in all of your taps or just some fixtures? Low pressure in selected taps or shower heads means that the problem is restricted to those certain parts.

On rare occasions, low water pressure may be because of a break in the mains line, which means that the supply pipes in your home are not to blame. However, it may be hard to tell if the mains is the problem.
http://capitalplumbing.ca/plumbing-experts-list-down-reasons-behind-low-water-pressure-in-taps/

Heating Experts List Down the Different Odours Related to HVAC Units

There are many ways to tell when a heating and cooling system is having problems, and one of that is through smell. Odours caused by an HVAC system in your home can be an indication of several types of problems, so never neglect even a hint of something smelling funny. The range of issues that result in foul smells can range from simple ones such a dirty air filters to severe problems like overheating in the system.

Dirty Sock Syndrome

Sometimes an HVAC system may give out very foul smells usually compared to the stink of dirty socks, which is not a pleasant comparison by any means. The cause of this smell is the growth of bacteria inside a heating and cooling system because of the ideal surroundings it provides. The bad smell becomes apparent when the appliance turns on.
http://capitalplumbing.ca/heating-experts-list-down-the-different-odours-related-to-hvac-units/

Heating Element Problems that are All Too Common in a Water Heater

Failure in an electric water heater can be the result of different components in the system malfunctioning. A water heater that presents problems requires repair services promptly to keep the issues contained, which is why the expertise of a certified contractor come in handy.

When your electric water heater is not producing enough hot water or fails to heat completely, you may be dealing with defective elements, which is a relatively common problem. However, before you can call in a professional, ensure that the switches are working fine, all connections are secure, and the circuit breaker is not tripped.
http://capitalplumbing.ca/heating-element-problems-that-are-all-too-common-in-a-water-heater/

Learn the Common Ductwork and Air Flow Problems in Air Conditioners

Homeowners only begin wondering about the working of their air conditioning systems once the temperatures get warmer, though never during the cold months. Summer may be the only time that an AC unit gets attention, thus making it more prone to problems that are often due to lack of maintenance. Some of the little nagging problems that come up when operating an air con are reparable if only they are spotted in good time.

The ductwork is part of the cooling system that may give you problems when you run an air conditioning system. When air from the system is not cool enough or only cools parts of the room, the ducts could be the issue.

Disconnected Ducts Some technicians don’t take the time to check out the ducts, causing them to misdiagnose problems that result from disconnected ductwork such as low refrigerant levels or faulty coils.
http://capitalplumbing.ca/learn-the-common-ductwork-and-air-flow-problems-in-air-conditioners/

Plumbing Companies Share the Best Tips on Keeping Your Drains Clean

Drains are perhaps the most overlooked part of a home’s plumbing, and homeowners would only think about them when it becomes clogged. Clogged drains are all too common among homes, and it often stems from lack of care and maintenance.

Even if clogged drains can happen at any time, it doesn’t mean that you should merely sit around and wait for the inevitable. Pay attention to your drains and follow these simple tips to ensure that it will stay clear for some time.

Watch What Goes Down the Drain

Clogged drains happen inevitably due to the things that go down through it. Thus, it follows that you should practice extra care on what you put into them. Drains are introduced with grease, soap scum, and coffee grounds on a daily basis, all of which can be the cause of clogs.
http://capitalplumbing.ca/plumbing-companies-share-the-best-tips-on-keeping-your-drains-clean/

Lower the Cost of Your Utility Bills with the Help of Expert Plumbers

Canadians are big users of hot water. Nearly 20% of the cost of energy consumed by Canadian households is for heating water. Add to that up to 60% for heating the home, and it totals a whopping 80% of your utility bill. Where costs are high, there are usually savings to be made.

Even with modern fuel saving technology, and the Energy Star products available today, trying to keep home utility bills down to a respectable level seems to be a never ending battle. Yet it can be done with a little thought, and the help of an Edmonton plumber.

Changing from Electricity to Gas

Although the cost of natural gas has increased considerably more than electricity over recent years, it is still the cheapest fuel for heating water and home. If you have both services connected to your property, then changing from electricity to gas to heat your water and home should see an immediate reduction in bills.
http://capitalplumbing.ca/lower-the-cost-of-your-utility-bills-with-the-help-of-expert-plumbers/